Adjusting sidelap and overlap with Site Scan Field

By default, Site Scan Field captures images with 70% overlap and 65% sidelap. These setting typically enable the generation of an accurate orthomosaic and point cloud without oversampling, but some conditions require more images.

To increase the sidelap (percent of the image that appears in adjacent survey paths) or overlap (percent of the image that appears in images along the same survey path), tap the gear icon in the upper-righthand corner and select "Flight Settings". Within the Flight Settings menu, you will see the option to manually control overlap and sidelap.

 

Adjusting sidelap and overlap with Site Scan Field from 3D Robotics on Vimeo.


Attachments

Live Chat

Available hours: 8am - 5pm PST

Email

Email our team for support

Hardware Services

Find an Authorized Service Center