Why is my Aero Plane flying Inverted?

The reason why the Aero sometimes is flying inverted is due to a change on the parameter "INVERTEDFLT_CH" and accidentally triggering the customized channel.  

To disable:

1.- Please access the Full Parameter List on your Ground Control Software and look for this next Parameter "INVERTEDFLT_CH". The description for this parameter is:

A RC input channel number to enable inverted flight. If this is non-zero then the APM will monitor the corresponding RC input channel and will enable inverted flight when the channel goes above 1750. 

2.- Set it to 0. It has been disabled. 

From <http://plane.ardupilot.com/wiki/arduplane-parameters/#Inverted_flight_channel_ArduPlaneINVERTEDFLT_CH>  




Live Chat

Available hours: 8am - 5pm PST


Email our team for support

Hardware Services

Find an Authorized Service Center