Leg Assembly

You will need:

leg assembly parts

1 Assemble leg

Align the leg plates, and place a standoff between each of the bottom three pairs of holes in the plates. Secure each standoff to the plates with a 5 mm bolt on each end. Insert the support plate into the horizontal slots at the top of the leg.

leg assembly diagramleg assembly complete

2 Attach leg to arm

Align the two holes in the top of the leg with the two holes in the center of the arm. Orient the leg with the point facing towards the center of the copter. Insert two 25 mm bolts through the arm and the leg, and secure with metal nuts.

leg to arm assemblyleg to arm assembly complete

Repeat these steps for each leg of your copter.


Live Chat

Available hours: 8am - 5pm PST


Email our team for support

Hardware Services

Find an Authorized Service Center