× Introducing Perimeter Scan, our newest flight mode

Both of the radios have blinking green LEDs, what this means?

This means the radios are not paired, they need to have the same NetID, in order to configure it follow the next procedure:

 

To change the NetID using Mission Planner:

  1. Connect the telemetry radio to the computer, select the serial port and 57600 bauds, don’t hit connect.
  2. Go to Initial setup, optional hardware, 3DR Radio.
  3. Click load settings button
  4. Select the NetID you want to use
  5. Click save settings
  6. Repeat for the second telemetry radio. Note: You need to disconnect the telemetry radio from the autopilot in order to use it with the computer.

    Image

    To change NetID using APM Planner:

    1. Connect the telemetry radio to the computer, go to the initial setup, 3DR Radio.
    2. Change the link settings selecting the serial port for the telemetry and 57600 bauds.
    3. Click load settings button
    4. Select the NetID you want to use
    5. Click save settings
    6. Repeat for the second telemetry radio. Note: You need to disconnect the telemetry radio from the autopilot in order to use it with the computer.

      Image
      Once you have the same NetID on both of the radios, the LEDs will turn solid green.

Email

Email our team for support