It’s so smart that it’s simple. You can fly manually using the controller or use the advanced 3PV Follow Me mode that turns IRIS+ into your own hands-free camera crew. And our tablet-based software makes flight planning exactly this easy: If you can draw it, you can fly it. The IRIS+ power system gets you 16 minutes of flight time fully loaded, and you’ll want to fill every second. IRIS+ includes the advanced Pixhawk autopilot system, a high-capacity flight battery, battery charger, ground station radio, and remote controller: everything you need to make IRIS+ your personal aerial photographer.
Ready to Fly – Inside the IRIS+ box is everything you need to fly. Simply attach the props, charge the battery, and you’re ready to fly manually with the included remote controller autonomously with a Mac, PC or Android device.
Follow Me – 3DR’s 3rd Person View (3PV) Follow Me technology turns your IRIS+ into your own hands-free aerial camera crew that puts you in the middle of your own adventure. IRIS+ can be easily setup to follow any GPS-enabled Android device with OTG compatibility. Not only will IRIS+ follow you, but this advanced technology controls the gimbal to keep the camera centered on you, capturing sweeping cinematic video from a perspective unlike any other.
Automatic Mission Planning – Using the free DroidPlanner app, IRIS+ users can plan flights by simply drawing a flight plan on any Android tablet or phone. This allows for hands free flight control, your drone will go where you tell it to go, with virtually unlimited waypoints – even keep IRIS+ pointing to the same location via a Region of Interest (ROI) waypoint throughout the entire flight. This enables fun autonomous journeys, and automatically stabilized video capture that would be otherwise impossible.
Flight Protection – The IRIS+ can land itself automatically, or return to a home point if it travels out of range or runs out of battery.
*Flight time varies with payload, wind conditions, elevation, temperature, humidity, flying style, and pilot skill. Listed flight time applies to elevations less than 2,000 ft above sea level.
Select the options below to personalize your IRIS+:
Telemetry radio frequency: Telemetry radios allow your ground station computer to communicate with your aircraft wirelessly, providing unparalleled ease of use for viewing real-time flight data, changing missions on the fly, tuning, and using an Android tablet as a ground station. Select 915 Mhz for the US and 433 Mhz for Europe. Frequency regulations vary by country, so consult your local airspace communication authority if you\’re uncertain which frequency is legal in your area.
LiveView for GoPro: Select this option to stream live video from a GoPro HERO onto a wireless monitor attached to your IRIS+ controller. This kit includes a video transmitter, monitor/receiver, cloverleaf antennas, and mounting bracket. Click here for more information.
Extra propellers: Add a set of two extra propeller to your IRIS+ and get back in the air fast. For a full set of extra propellers, follow this link and add another set to your order.
GoPro: IRIS features a GoPro-compatible camera mount for capturing unique aerial videos with everyone\’s favorite portable HD camera. Select this option to receive a Go-Pro HERO4+ Silver with IRIS! Please note that we cannot ship GoPro internationally. When using a GoPro with IRIS+, please ensure that the WiFi is turned off; this can cause interference between IRIS and the controller.
Add a Case: Want to explore the world with your IRIS? Add a sturdy IRIS case to transport your IRIS safely and securely. This case accommodates all of your accessories, including a tablet, RC, an extra GoPro HERO camera, battery packs, legs and props.
Replacement arms: Don\’t get caught off guard by the unexpected, select a pair of replacement arms in either black or blue, and get back in the air fast.
Video stabilization system: The Tarot T-2D brushless gimbal uses cutting-edge two-axis stabilization technology to ensure great, stable video in any flight condition. The gimbal comes pre-configured and tuned for a smooth out-of-the-box experience. The kit includes: a pre-assembled Tarot gimbal, a mounting plate, and required cables and hardware.
Extra battery: Don\’t be limited by the flight battery included with IRIS+, select this option to receive extra batteries for more flights between charges.
SD Card: Need an SD card for your GoPro? Select this option to receive a 16 GB micro-SD card.
Replacement legs: Don\’t get caught off guard by the unexpected, select a pair of replacement short legs in either black, blue, or red, and get back in the air fast.
Visit the IRIS+ Information Portal for instructions, software downloads, and user guides.