× Webinar: Learn how the Arizona DOT used Site Scan to cut the time and cost of redesigning the Pinto Creek Bridge. Click to read more

Powering the Transmitter

1  Flip the center switch to the ‘On’ position.


Screen Shot 2015-02-20 at 1.38.29 PM

Ensure that the controller is always turned on while IRIS is powered. If IRIS loses communication with the controller in flight, IRIS will initiate an automatic return to launch.


2   Press and hold the DN button on the controller to view flight data from IRIS. See the Flight Checklist for more information about controller flight data.



Email our team for support