Follow these steps to power the X8.
1 Turn on the controller. Ensure that the switches are set to CH 7 OFF, STD, and RTL OFF.
Screen Shot 2015-03-06 at 11.06.49 AM
2 To power on the X8, join the yellow connector on the battery with the yellow connector on the X8. Keep the X8 still and level while it powers on and initializes the sensors. When the status LED displays blinking blue, the sensors have completed initialization and you can move the X8.
3 When the initialization process is complete, turn over the X8 and secure the battery to the underside of the vehicle using the velcro straps.

warningSafety: It is important to establish communication before powering on the X8. Always turn on the controller before connecting the battery. When powering off the X8, disconnect the battery before turning off the controller.